Variation of Condition 1 of planning permission dated 19th April 2023 (RN: 20/04541/FULL) for, 'Erection of an extension at the rear of 18-22 Wigmore Street at first to fourth floor levels and alterations to the rear roof form to allow conversion of the attic space to provide additional residential floorspace for the existing flats (Class C3), including the infilling of an internal lightwell adjacent to 16 Wigmore Street and the installation of a new lift. Alterations at basement and ground floor level including the infilling of a rear lightwell at basement and ground floor levels. Installation of plant within an associated enclosure at rear first floor level with a green roof over and screened plant on a flat roof at fourth floor level to the rear of 22 Wigmore Street. Alterations to the front of the building including new windows, shopfronts and metal railings at ground floor level. All in connection with the dual / alternative use of the basement, ground and first floors as either office (B1) / retail (A1) or a sui generis use comprising piano showroom, office space, new recital room, piano practice rooms and workshop space and use of the second to new fifth floors as 8 residential units comprising 3 x 1 bed; 4 x 2 bed and 1 x 3 bed' (SITE INCLUDES 18, 20 AND 22 WIGMORE STREET); NAMELY to install additional plant at rear first floor level and amend the approved enclosure, decorative cladding and green wall. (Application under Section 73 of the Act).

Amendment to application 22/P/1623/FUL (Extension of mixed use Brewery (Use Classes B2 (general industrial), E(g)(i) offices, E(g)(iii) industrial processes) and C3 residential building. Works to include conversion and extending the single storey, non-residential (former brewery) building by 1.5m to the east, 0.2m to the north to create a reception, kitchen and 2no. workspaces and the erection of a first floor over this to create additional workspaces and 2no. shower rooms; new roof with 6no. dormer windows and changes to the fenestration) to allow changes to materials on east elevation from natural stone to cladding

Non-material amendment to planning permission ref: 2021/04138/FUL granted 31st May 2022. Amendments to remove specific reference to the number of bedrooms of the approved residential units; alterations to the design of 1no rooflight above the roof of ground floor back addition; replacement of 1no window to the rear elevation and sliding doors to the rear side back addition of basement floor with new bi-folding doors. The new description would read 'Change of use of part of ground floor and basement from retail (Class E) into 1no. self-contained flat (Class C3); erection of rear extensions at third floor (pod) and first floor levels in connection with the conversion of first, second and third floor level into 2no. self-contained flats; installation of 3no rooflights in the front roofslope and 1no rooflight above the main flat roof at roof level; replacement of existing windows with new windows to the side and rear of first and second floor back additions; replacement of existing dormer window with a new dormer window in the rear roofslope; alterations and increasing the roof of second floor rear back addition; formation of a replacement roof terrace at first floor level to the rear elevation; demolition of part of ground floor and basement floor level including the installation of new window openings and formation of a central courtyard at ground floor level, installation of glazed doors and a window at basement level; alterations to the roof of ground floor rear back addition to include the installation of 3no rooflights; installation of screening fence at ground floor level to the rear elevation.'

Variation of Conditions 1 'Approved Plans' of planning permission ref. no. 22/AP/1797: Minor Material Amendment for full planning permission 20/AP/1119 dated 11/06/2020 for Conversion of the existing first and second upper floors to 2 x 3 bedroom residential self-contained flats with associated refuse storage and the erection of a rooftop extension to form additional 1 x 1 bedroom flat: - Square off the diagonal corner to the front elevation; - Extend the proposed structure to the rear by 0.48m; - Increase the internal floor to ceiling height by way of raising the structure's height; - Internal reconfiguration to provide x1 additional bedroom - Re-organisation of front and side elevation to correspond with internal reconfiguration. Proposed s73 amendments include to: - Increase the height of the approved roof extension by 0.3m - Extend the footprint of 1m (width) x 4.5m (depth) to the northern elevation of the roof extension to utilise the existing staircase and internal reconfiguration; - Relocate the roof extension southwards by 0.3m with increases in depth and width from 13.8m to 14.5m and 5m to 5.8m respectively - Reorganise fenestrations to correspond with internal reconfiguration - Amend external material finishes from the aluminium framed glazing system and fibreglass resin roof to squared edge larch timber cladding, membrane roof and pine timber window frame

Non material amendment of planning permission ref. no. 20/AP/1119: Conversion of the existing first and second upper floors to 2 x 3 bedroom residential self-contained flats with associated refuse storage and the erection of a rooftop extension to form additional 1 x 1 bedroom flat. Proposed amendments include to: - Increase the height of the approved roof extension by 0.3m - Extend the footprint of 1m (width) x 4.5m (depth) to the northern elevation of the roof extension to utilise the existing staircase and internal reconfiguration; - Relocate the roof extension southwards by 0.3m with increases in depth and width from 13.8m to 14.5m and 5m to 5.8m respectively - Reorganise fenestrations to correspond with internal reconfiguration - Amend external material finishes from the aluminium framed glazing system and fibreglass resin roof to squared edge larch timber cladding, membrane roof and pine timber window frame

Minor material amendment (S.73) to vary condition no.2 (approved plans), seeking to allow changes in the first floor design, in pursuant to planning permission reference 216171FUL dated 21/12/2021 for'' Conversion of the existing property into four self-contained residential units, with associated cycle storage, refuse storage facilities and amenity space; alteration of roof from hip to gable end; rear roof extension incorporating two Juliet balconies and installation of three roof lights to front roof slope; single storey side/rear (wraparound) extension (following demolition of existing outbuildings and front addition); first floor side/rear extension; alteration to side and rear fenestration; erection of boundary wall and fences alteration to front of property include involving hard and soft landscaping; alterations to the roof of front projecting element and partial demolition of single story front projection and chimney stack''

Minor material amendment (S.73) to vary condition no.2 (approved plans), seeking to allow changes in the first floor and roof design, in pursuant to planning permission reference 216171FUL dated 21/12/2021 for'' Conversion of the existing property into four self-contained residential units, with associated cycle storage, refuse storage facilities and amenity space; alteration of roof from hip to gable end; rear roof extension incorporating two Juliet balconies and installation of three roof lights to front roof slope; single storey side/rear (wraparound) extension (following demolition of existing outbuildings and front addition); first floor side/rear extension; alteration to side and rear fenestration; erection of boundary wall and fences alteration to front of property include involving hard and soft landscaping; alterations to the roof of front projecting element and partial demolition of single story front projection and chimney stack''

Application for a Non-Material Amendment following a grant of planning permission 20/02784/FUL (De-conversion of existing 2 flats into one self contained residential unit, involving the erection of a single storey rear extension at basement level, erection of a first floor rear extension. Alterations to existing cast iron railings to accommodate an access gate and cast iron staircase in front lightwell, repair work to existing external and internal fabric; replacement of existing roof finish from concrete tile to fibre cement slate; replacement of existing sash windows with double glazed timber sash windows) granted on 11.01.2021. Amendment sought: Addition of a retractable awning to flank wall of existing kitchen extension

Non-material amendment to planning permission ref: 2020/03456/FUL granted 31st March 2021 for the 'Erection of a rear extension at fourth floor level, on top of the existing back addition following the removal of existing roof terrace in connection with the conversion of third and fourth floor levels into 2 x 1 bedroom self-contained flats; replacement of existing windows with new double glazed timber sash windows at first, second, third and fourth floor levels; installation of a new shopfront and alterations to the front glazing to include the installation of a new residential entrance door; installation of new rooflights and 8no solar panels at main roof level.' Amendments to include re-location of the cycle storage and temporary bin store from the front of the property to the rear at ground floor level; alterations to the front glazing and to the rear elevation to include new doors to bin and cycle storage at ground floor level to the rear elevation.

Erection of a rear roof extension; erection of a single storey rear extension, to the side and rear of the existing back addition; installation of 3no rooflights in the front roofslope; installation of a new door and window to replace the existing window to the side of single storey back addition; installation of new doors and windows to replace the existing doors at ground floor level to the rear elevation; conversion of existing property from 4 bedroom HMO into 8 self-contained residential units (Class C3). (Re-consultation carried out to amend the original proposal description, which incorrectly referred to a large-scale HMO, as opposed to self-contained residential units. No changes to the original drawings have been made).