Change of use of part of ground and basement floor level from retail (Class E) into residential (Class C3); erection of a rear roof extension; erection of a rear extension at second floor level over part of the existing back addition; erection of a single storey rear extension at lower ground floor level to the side of the existing back addition; installation of a new window to replace existing, to the rear elevation at upper ground floor level; installation of a new door to replace the existing window, to the rear elevation at lower ground floor level; erection of bike and bin stores following the demolition of the existing extension, to the rear of rear back addition at lower ground floor level; removal of existing window to the side of rear back addition at upper ground floor level; conversion of third, second, first, upper ground, part of lower ground and basement floor levels to provide 2 x two bedroom and 2 x one bedroom self-contained flats.

Non material amendment of planning permission ref. no. 20/AP/1119: Conversion of the existing first and second upper floors to 2 x 3 bedroom residential self-contained flats with associated refuse storage and the erection of a rooftop extension to form additional 1 x 1 bedroom flat. Proposed amendments include to: - Increase the height of the approved roof extension by 0.3m - Extend the footprint of 1m (width) x 4.5m (depth) to the northern elevation of the roof extension to utilise the existing staircase and internal reconfiguration; - Relocate the roof extension southwards by 0.3m with increases in depth and width from 13.8m to 14.5m and 5m to 5.8m respectively - Reorganise fenestrations to correspond with internal reconfiguration - Amend external material finishes from the aluminium framed glazing system and fibreglass resin roof to squared edge larch timber cladding, membrane roof and pine timber window frame

Change of use & conversion of existing ground floor community centre (F.2) and first floor residential unit to create 5no one bedroom flats (C3) together with external alterations including erection of two storey side & rear extension, roof extension, rear dormer, front & rear rooflights and revised fenestration.

Variation of condition 2 of planning permission F/TH/20/0684 for the "Change of use and conversion from retail (use class A1) and residential (use class C3) to retail and 3No one bed self-contained flats and 1No studio apartment together with the erection of a 4 storey rear extension, insertion of dormers to rear and rooflights to front roof slope, excavation to rear to allow for creation of steps to basement with alterations to fenestration and rear entrance at basement level" to allow internal alterations at ground floor

Application for a Non-Material Amendment following a grant of planning permission 20/02784/FUL (De-conversion of existing 2 flats into one self contained residential unit, involving the erection of a single storey rear extension at basement level, erection of a first floor rear extension. Alterations to existing cast iron railings to accommodate an access gate and cast iron staircase in front lightwell, repair work to existing external and internal fabric; replacement of existing roof finish from concrete tile to fibre cement slate; replacement of existing sash windows with double glazed timber sash windows) granted on 11.01.2021. Amendment sought: Addition of a retractable awning to flank wall of existing kitchen extension

Non-material amendment to planning permission ref: 2020/01249/FUL granted 16th October 2020 for the 'Erection of a hip to gable end roof extension; lowering the ridge height of the main roof and erection of an additional floor at roof level; raising of the front and rear parapet walls; alterations to the first floor roof of back addition to include the installation of new rooflights; alterations to the front fenestration to include the installation of new windows at first floor level, new windows and doors at ground floor level to replace the existing doors and windows; alterations to the rear fenestration to include installation of new windows to replace the existing windows at ground floor level; removal of existing windows at first floor level to the rear elevation; lowering of internal floor level and change of use from office (Class B1) into residential (Class C3) in connection with the conversion into 2 x 2 bedroom self-contained flats.' Amendment of facade treatment from approved render finish to a brick finish.