Non material amendment of planning permission ref. no. 20/AP/1119: Conversion of the existing first and second upper floors to 2 x 3 bedroom residential self-contained flats with associated refuse storage and the erection of a rooftop extension to form additional 1 x 1 bedroom flat. Proposed amendments include to: - Increase the height of the approved roof extension by 0.3m - Extend the footprint of 1m (width) x 4.5m (depth) to the northern elevation of the roof extension to utilise the existing staircase and internal reconfiguration; - Relocate the roof extension southwards by 0.3m with increases in depth and width from 13.8m to 14.5m and 5m to 5.8m respectively - Reorganise fenestrations to correspond with internal reconfiguration - Amend external material finishes from the aluminium framed glazing system and fibreglass resin roof to squared edge larch timber cladding, membrane roof and pine timber window frame

Application for a Non-Material Amendment following a grant of planning permission 20/02784/FUL (De-conversion of existing 2 flats into one self contained residential unit, involving the erection of a single storey rear extension at basement level, erection of a first floor rear extension. Alterations to existing cast iron railings to accommodate an access gate and cast iron staircase in front lightwell, repair work to existing external and internal fabric; replacement of existing roof finish from concrete tile to fibre cement slate; replacement of existing sash windows with double glazed timber sash windows) granted on 11.01.2021. Amendment sought: Addition of a retractable awning to flank wall of existing kitchen extension

Non-material amendment to planning permission ref: 2020/01249/FUL granted 16th October 2020 for the 'Erection of a hip to gable end roof extension; lowering the ridge height of the main roof and erection of an additional floor at roof level; raising of the front and rear parapet walls; alterations to the first floor roof of back addition to include the installation of new rooflights; alterations to the front fenestration to include the installation of new windows at first floor level, new windows and doors at ground floor level to replace the existing doors and windows; alterations to the rear fenestration to include installation of new windows to replace the existing windows at ground floor level; removal of existing windows at first floor level to the rear elevation; lowering of internal floor level and change of use from office (Class B1) into residential (Class C3) in connection with the conversion into 2 x 2 bedroom self-contained flats.' Amendment of facade treatment from approved render finish to a brick finish.