Application submitted under Section 73 of the Town and Country Planning Act 1990 for the variation of condition 3 (approved plans) attached to planning permission 22/00882/FUL dated 23 Sept 2022 (Erection of single storey extensions to rear, replacement detached garage, replace flat roof on front extension with pitched roof and entrance canopy, part replace boundary hedge with brick wall and railings, fencing and access gates, part render brickwork and re-roof main dwelling) to permit an increase in the width of the front extension

Application under Section 73 of the Town and Country Planning Act 1990 to carry out development without compliance with Condition 1 (Approved Plans) of Planning Permission ref: 21/03750/FUL (Demolition of existing house and erection of three storey dwellinghouse (including accommodation in roofspace) and erection of new boundary fencing to left hand side and installation of new entrance gate) dated 26/01/2022. Variation to consist of the following changes by removing single storey room at rear, amendments to roof form of two storey front extension and alterations to the pitch of the main roof slope, including increasing the width of the rear dormer window and scale of the front dormer windows, alteration to window scale and detailing, adding obscure glazed windows to the side elevations, and materials to front and rear elevations; replacing the front side boundary on the right hand side; and addition of solar panels, and air-conditioning units relocated at high level towards the rear of the house.

Application to vary condition 2 of planning consent 213207 for the proposed erection of a first floor over existing dwelling with 1 no. flat roof dormer to the side elevation, 3 no. roof lights and 2 no. Juliet balconies, erection of a part single part two storey side extension with 2 no. roof lights following demolition of existing garage, erection of a new wall and gate to front drive to replace existing timber fence, plus changes to fenestration. Condition 2 relates to the approved details and the variation is to raise part of the roof to amend the ceiling height to bedroom 2.

Variation of condition 2 of planning permission ref: 2020/02540/FUL granted 25th January 2021 for the 'Demolition of existing timber yard storage building and erection of a replacement part one, part three storey plus basement building with a roof terrace at first floor level to provide 1 x 1 bedroom residential unit (Class C3) with flexible commercial floorspace (Class E) at basement and ground floor level fronting Kelvedon Road and Darlan Road; erection of a part one and part three storey 2 bedroom single family dwellinghouse (Class C3) fronting Kelvedon Road elevation' to allow amendments to the approved drawings to include: alterations to north eastern elevation to change second floor roof window with a dormer window, enlargement of ground floor windows, alterations to south eastern elevation to increase the size of the dormer window, alterations to refuse storage, provision of an external amenity space associated with the Class E unit, additional high level window on the ground floor to be made fixed shut, alterations to south western elevation to allow all windows to be made of aluminium casement frames, additional window to roof level, dormer window panes to change from 3 to 2, ground floor north western wall to be set back further, increasing the size of the dormer of dwellinghouse, 2no exterior gutters to be constructed of cast iron, reducing the height of the front fencing/gates to 1.8m, alterations to north western elevation to include the additional of a conservation type roof window for bathroom, part of the top of boundary wall to be finished in lead, alterations to front basement lightwell, basement to extend to church wall, alterations to ground floor layout, additional obscure glazed panels in terrace of dwellinghouse, alterations to first and second floor layouts and AOV roof window over stairs of dwellinghouse.

Non material amendment to application 20/P/2440/FUL ( Variation of condition Number 2 (approved plans) on application 19/P/2244/FUL (extension to existing dwelling and conversion of existing dwelling into 2no. residential dwellings; erection of 7no. additional dwellings, internal access road, landscaping and associated works) to allow for changes to partially replace the former brick boundary wall between 4 The Avenue and 118 High Street with timber fencing) to allow the following 1. Plot 1 rear utility door to be 1/3 timber and 2/3 glazed rather than all glazed, 2. Plot 1 French doors to be changed to venetian sash, 3. Plot 2 Roof lights to be increased in size, 4. Plot 2 front porch - front door to be centred and small windows on either side to replace one circular window 5. Plot 2 wall inside garden to be re-built to slightly different dimensions

Variation of condition Nos. 2 (Approved Plans) and 7 (Gradient) of planning permission reference 19/04556/FULL1 (dated 17 July 2020 for erection of first floor extension to existing dwelling incorporating new roof, front porch, pitched roof over existing garage, elevational alterations and landscaping including fencing and retaining walls, formation of access on to Berens Way and subdivision of the plot and resulting building to form pair of semidetached dwellings) to allow; - Fenestration changes through the approved building - Rewording and amendment of condition 7 (The gradient of the new vehicular access shall not exceed 1:8 at any point)

Variation of Condition 2 (approved plans) of planning permission 18/04473/FUL (Erection of a single storey ground floor side extension and the installation of bi-folding doors to the rear return. Granted on: 24/12/2018 Variations sought: Part change of material from Zinc to London Stock Brick to match existing dwelling for all new walls. Bi-folding doors to the rear return changed to sliding. Pivot door to replace hinged door and side light. Introduction of two high level side windows. Roof material to change from Zinc to single ply membrane. Roof glazing reduced to 2no. 1000x1300 rooflights. Geometry of rear glazing panel amended to a rectangle. New 1.8m boundary wall to the side and rear to replace existing 1.8m fencing. Drawing PL-01 to be replaced by PL-01 Rev B Drawing PL-02 to be replaced by PL-02 Rev B Drawing PL-03 to be replaced by PL-03 Rev B Drawing PL-04 to be replaced by PL-04 Rev B Drawing PL-05 to be replaced by PL-05 Rev B