Notice of intent to carry out works to trees in a Conservation Area: Front Garden - T1 Willow Tree - Re-polllard to previous points approx 4m reduction. T2 Walnut Tree - reduce by 2-3m overall, crown lift over drive way up to 5m. Rear Garden-Right hand Side T3 Willow Tree - Reduce by 2-3m overall. T4 Willow Tree - Reduce by 3m overall T5 Willow Tree - Reduce lowest branch over the lawn area by half approx. 4-5m. T6 Sycamore Tree - Fell to ground level, Tree is rubbing on fence and will never be a specimen Tree as it struggles for light under the large Weeping Willow which has caused all the growth to be overhanging the Neighbours land. T7 Willow Tree - Reduce by 3-4m overall. Rear Garden - Left Hand Side T8 Apple Tree and T9 Conifer -Fell to ground level as poor specimens tall and thin and covered in Ivy. T10 Cherry Tree - Reduce by 3m overall - to control size of Tree and give good clearance to Village Hall. T11 Cherry Tree - Fell to ground level, Tree is no specimen due to its location under the Larger Cherry Tree, it leans towards the Village Hall and is touching the roof, all growth is over the boundary line. T12 Cherry Tree Reduce by 3-3.5m overall, remove the lowest branch on the Village Hall side back to the trunk. Reduce to control size of Tree, remove branch as an obstruction on the Village Hall side for Vehicles etc. T13 5 Hazel Trees- Reduce to leave at 3m above ground level. T14 Apple Tree - Reduce by 3-4m - Tree has become too dominant in this area by the side of the Garage, reduce to control size and reduce liability risk of limb failure.

Norway Maple (T1) Prune back overhanging branches to boundary to a height of 2m above garage roof; Lawson Cypress (T2) Fell; Holly, Lawson Cypress, Elder, Laurel and Ivy (G1) Raise crowns to 6m over the carriageway and 3m over the footpath; Firethorn and Holly (G2) Cut back hard, to driveway edge; Lawson cypress (G3) Fell; Lawson cypress, Yew and Mock Orange (G4) Prune to clear fence by 0.5m.

T1 - Horse Chestnut: Fell because Roots are undermining garage foundations - no replacement tree to be planted due to existing trees proximity to Garage foundations; T2 - on western boundary : Pollard due to excessive shading; T3 -on southern boundary: remove top part of tree down to level of adjoining roof line due to excessive shading; T4 - on southern boundary: remove top part of tree to two metres above fence due to excessive shading; T5 -on southern boundary: remove top part of tree to two metres above fence due to excessive shading.

T1 ASH. Branch B1 overhanging into our garden at fence boundary and branch B2 reaching across and touching rear of our garage roof. Both branches to be removed. T3 APPLE. Height reduced to 2.5m T4, T5, T6 3no. CONIFE. Reduce canopy height by 2m and canopy spread by 1.5m.H1 CONIFER HEDGE. Prune.

1. Large fir trees along boundary to business park drive (coloured blue on sketch). These are part of a double row - the other half is owned by the business park and the trees were reduced in height around 2 years ago. Following last years' storms two trees on the other side of our boundary fell and we should like to reduce the 14 on our side by approximately half their height (still leaving them around 15 ft tall, to prevent risk of breakage in high winds in future and also to improve lighting to our property 2. Fir trees coloured green on sketch and leylandii (not coloured but running in line to garage). These were reduced in height two years ago but only by a small amount. High winds last year created some damage with falling branches breaking fences on both sides and we are concerned that future storms may bring whole trees down. In addition, the owners of the business park say that the branches on their side are potentially causing damage to vehicles parked there. We propose to reduce height by 15-20 ft (the trees are around 45ft high) and also to reduce thickness of growth on the far side. 3. Poplar trees coloured in dark blue. These were reduced two years ago but the contractors did not remove as much as requested (or granted) at the time and we are still concerned by the prospect of trees falling in high winds. We should like to do additional work , reducing height to just below the level of the roof of the main house 4. Mulberry Tree (coloured pink) -to reduce it in height by probably 2-3m so that it is slightly higher than what is left of the firs behind, allowing it some additional light. 5. Eucalyptus tree (purple) - lost some high branches in high winds - to be reduced and re-shaped for safety (about 10ft removed, leaving it at around 20ft high) 6. Fir tree at edge of garden (yellow). The reduction would be approx. 4m, in line with the above, potentially with up to 15% thinning of the lower

- Fell one eucalyptus tree in front garden, growing at a dangerous angle and signs of basil decay. - Crown lift and cut back to boundary four ash trees on east side of house, these are currently overhanging the boundary fence and to reduce the chance of squirrels getting onto roof and subsequently causing damage in loft space. - On roadside crown lift group of hazel and maple to 5.5 metres which are encroaching on the lane and to trim back away from electricity cables. - On roadside remove one limb from one ash tree which is over hanging garage.

Conservation area notification to: reduce top of one large ash by 2m leaving overall height of 8m, and limbs overhanging garden back to boundary line leaving spread of 8m; reduce two ash to below fence line to stop encroachment of garden and garage roof; reduce top of one ash by 2m leaving overall height of 9m, and limbs overhanging garden by 3m leaving a spread of 9m.