T1 Robinia: Crown lift to 2.5 to improve access beneath, Reduce 1.5m laterally to clear neighbouring building and shed roof T2 self-set Sycamore (approx. 4 metres high): Fell to ground level.

1. 2 x Leyland Cypress (T1 and T2) - Fell The trees are part of the boundary hedge between our house (No. 3) and our neighbours at No. 4. It is very close to both houses (actually overhanging our house) and very large. They are simply oppressive to both properties. The larger tree is already crushing our shed and making it unusable and, with age, branches have started to fall in high winds onto our roof.

T1 - Yew, Taxus baccata. 1. Reduce branches growing towards building/roof and shed only by up to 2 metres in length to provide clearance from the dwelling and shed in rear garden and to reduce the...

T1. Ash. This tree is infected with Ganoderma applanatum and Inonotus hispidus, these bracket fungi are evidence along with the lack of foliage in the canopy that the tree's base is decaying, the tree has previously shed a large codominant leader, so we are applying to have the tree dismantled and removed, due to it's proximity to high traffic and foot fall. T2 Horse chestnut. This multi stemmed tree we seek to prune back the branches by up to 1.5m, off, of the neighbouring South side boundary roof, with maximum pruning cuts of no more than 75mm. T3 Lime. Remove deadwood on property side, along with pruning back the branches by up to 1.5m, off of the neighbouring South side boundary roof, with maximum pruning cuts of no more than 75mm. T4 Strawberry/Red horse Chestnut tree. This tree has significant decay at the base on the SW side, after using a nylon hammer I was able to conclude that the decay is more extensive than is visually evident and as such, I would like to thin the crown by up to 15% with pruning cuts of up to no more than 75mm, to lessen the sail effect and chances of future failure.

T3- TPO No. 331, 2014. Remove a group of smaller branches that have grown from an area where a large branch was previously removed before it had a TPO. Lift the crown to give a 1.5-2m clearance above the shed underneath for cleaning and maintenance of the roof.

T1. Lawsons Cypress - crown lift and reduce height by 2m. T2. Lawsons cypress - prune to clear adjacent building by 1m and reduce height by 2.5m. T2a. Lawsons cypress - prune to clear adjacent building by 1m. T3. Lawsons cypress - prune to clear adjacent building by 1m. T4. Lawsons cypress - crown lift 2m (to top of wall), prune to clear pan tile roof of shed by 0.5m and reduce height by 2.5m. T5 & 6. 2no Lawsons cypress - crown lift by an additional 0.5-1m, remove dead pegs and reduce height by 2m. Prune to clear poly tunnel by 0.5m. T7. Lawsons cypress - crown lift to top of wall, reduce height by 2.5m.

T.1 Yew - Crown lift to provide 1.5m clearance from shed roof. T.3 Pine - Remove hanging branch and tidy stubs. T.4 Pine - Remove hanging branch and tidy stubs. T.5 Oak - Fell.

1 x sycamore (T1): crown reduce by 50% 1 x strawberry tree (T9): crown reduce by 30% 1 x lime (T10): crown reduce by no more than 30%, pruning back to suitable growth points and shaping to create a natural flowing canopy outline. Remove epicormic growth to crown break. 1 x lime (adjacent to T10): crown reduce by no more than 30%, pruning back to suitable growth points and shaping to create a natural flowing canopy outline. Remove epicormic growth to crown break. 1 x hornbeam (next to tennis court): reduce single low limb which is touching adjacent shed roof, by 30-40% to reduce end weight, pruning back to suitable growth points. 1 x cedar (one sided, drawn-up tree): fell

G1, Oaks(4) : Reduce crown spread extending to north by approximately 3m, back approximately to a line with ridge of shed roof; branches to be cut back to appropriate growth points; maximum diameter of cuts 150mm; remove any significant major deadwood overhanging garden. Reason for works: Appropriate arboricultural management

T1, Ash : lift branches above shed and garage to give 2m clearance; reduce lowest limb and branch above to give 2m clearance above garage; reduce lowest two branches above patio to give clearance; trim back marked growth on picture 3 to give clearance from roof of house; remove base epicormic (no cuts to exceed 100mm diameter) T2, Oak : remove epicormic growth from stem; crown lift lower limbs to a height of 5m from garden of 29 Brand Road; crown lift to 8m from 21 Gronan Close to balance the canopy (21 is lower, so therefore 8m to balance the lower canopy)